Auto Filter Booth

SOLID BACK FILTER BOOTH

Most widely used in the truck painting industry. 

  • Entrance through filtered doors located at front of booth.
  • Solid back allows back of booth to be against a wall or other obstruction if necessary.

REAR DRIVE FILTER BOOTH

Is also known as reverse flow. 

  • Entrance through solid doors at the rear of booth.
  • Recommended: when at least 3 feet of clearance is available at the front of the booth to allow for air intake.
  • Advantage: airborne dirt from leaks that inevitably develop around all booth entrance doors will pass directly into the exhaust chamber without passing over the newly painted vehicle.

DRIVE-THRU FILTER BOOTH

  • Recommended: where adequate working area is available.
  • Incorporates both filtered front doors and solid rear doors.
  • Allows entrance or exit through either end of booth for better workflow or movement of painted vehicles to flash-off or oven enclosure.

CONSTRUCTION

  • Skidded and banded panels for forklift handling
  • 18-gauge galvanized steel panels
  • 5/16 nut-bolt construction
  • Smooth interior for easy maintenance
  • Rests on 14-gauge galvanized steel floor angles
  • All Paint Spray Booths adhere to the International Codes. Always check your local codes for special conditions that may vary.

CODE COMPLIANCE

NFPA 33 Standard for Spray Application Using Flammable or Combustible Materials 

NFPA 34 Standard for Dipping, Coating, and Printing Processes Using Flammable or Combustible Liquids 

NFPA 70 National Electric Code 

NFPA 91 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Particulate Solids 

NFPA 101 Life Safety code 

IBC International Building Code 

UMC Uniform Mechanical Code 

IFC International Fire Code 

*Electrical components, such as motors, motor starters, disconnect switches, push buttons, and lights are listed or approved for the Class and Division in which they are located.  

Booth Package

  • Fan & Motor
  • Exhaust Filters
  • Solenoid Valve
  • Nuts & Bolts
  • Manometer
  • Light Fixtures
  • Assembly Instructions
  • Tubes or Bulbs 
  • Duct Package 
  • Sprinkler Systems 
  • Air Lines 
  • Electrical Switches 
  • Motor Starter 
  • Attachment Anchors from booth to floor 
  • Electrical connection 
  • Conveyor Openings 
  • Explosion-Proof Motors 
  • Custom Sizing 
  • Powder coated panels 
  • Front filtered doors to include venting latch(es) & door interlocks 
  • Crossdraft 
  • Downdraft 
  • Semi-downdraft 
  • Infrared Heat 

NOTES: 

Automotive-type Booths are generally used for vehicular-type equipment with drive-in or drive-thru options.  They are best for supplying clean air and quality lighting.  Various draft and heat options are available.  Heated air make-up is recommended for cold climates.   
1

INTAKE FILTERS

Various options are available. Clean air efficiency requirements are the determining factor. All intake filters are listed as Class I or II in accordance with UL 900.

2

EXHAUST PLENUM/FILTERS 

Various options available for exhaust filters: fiberglass, high efficiency, pocket type, and more. Depending on your process, our experts can suggest the best filter suited for your needs. 

3

FAN

Construction
  • Construction for fan is of non-sparking materials.
  • AMCA Certified for air and sound
  • Fabricated Aluminum Blades
Motor
  • Motors are U.L. Listed
  • 3-phase, 208/230/460 volt, 60Hz
  • Face Velocity exceeds 100 F.P.M. code requirement
  • See specs for C.F.M. values per booth size
  • Belt driven with enclosed belt guards
  • Motor to include identification plate stating the ventilation rate for which the system is designed
Solenoid Valve
  • Single Phase (voltage must be stated)
4

LIGHT FIXTURES 

U.L. and C-U.L. approved. 120-volt Light Fixtures.  LED and Fluorescent available.

Types: 

  • Vapor- Tight (V.T.) for Class 1, Division 2 locations (National Electric Code and NFPA 70) 
  • Listed Open-Type (O.T.) fixtures 

Mounting: 

  • Placed on the outside of ¼” clear tempered (heat treated) glass, gasketed and locked into place at the working depth.   
5

MANOMETER 

A visual differential pressure gauge required for filtered spray booths. As build-up occurs, pressure increases.  The manometer provides a visual indication that filter(s) require replacement. 

6

CONTROL PANEL

U.L listed control panel for motor and light control

AUTO SOLID-BACK FILTER BOOTH

SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.
ASB-1818'-8"20183-0T-5VT1 PAIR1None34"212,500
ASB-2323'-8"20187-OT-5VT1 PAIR1None34"212,500
ASB-2626'-2"20187-OT-5VT1 PAIR1None34"212,500
ASB-2828'-8"20189-0T-5VT1 PAIR1None34"212,500
ASB-3333'-8"201813-OT-5VT1 PAIR1None34"212,500
SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.

AUTO REAR-DRIVE FILTER BOOTH

SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.
ARB-1818'-8"20183-0T-5VTNone11 PAIR34"212,500
ARB-2323'-8"20187-OT-5VTNone11 PAIR34"212,500
ARB-2626'-2"20187-OT-5VTNone11 PAIR34"212,500
ARB-2828'-8"20189-0T-5VTNone11 PAIR34"212,500
ARB-3333'-8"201813-OT-5VTNone11 PAIR34"212,500
SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.

AUTO DRIVE-THRU FILTER BOOTH

SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.
ADT-1818'-8"20183-0T-5VT1 PAIR11 PAIR34"212,500
ADT-2323'-8"20187-OT-5VT1 PAIR11 PAIR34"212,500
ADT-2626'-2"20187-OT-5VT1 PAIR11 PAIR34"212,500
ADT-2828'-8"20189-0T-5VT1 PAIR11 PAIR34"212,500
ADT-3333'-8"201813-OT-5VT1 PAIR11 PAIR34"212,500
SKUDEPTH OVERALLINTAKE FILTEREXHAUST FILTERLIGHT FIXTURESFRONT DOORACCESS DOORREAR DOOREXHAUST FAN DIAMOTOR H.P.C.F.M. @ 3/8" S.P.

Request a Quote or Custom Build

Contact US